Liftruck

It includes an order picker to carry the pallet with reels, the INDEVA Liftronic with articulated arm and the orbital tool head for handling reels. Necessary in the textile industries in the texturizing, spinning and weaving areas to load creels up to 5 m high with reels up to 40 kg.

A single man can carry out the whole work cycle collecting the pallets in the stock room, carrying them up to the creel and load them rotating them by 90°, then collecting all the tubes and carton blanks.

By means of the expanding chuck of the orbital tool head the operator can quickly and precisely pick and release the reels. The release is allowed only when the reel is safely placed on the pin.

The electronic balancer INDEVA grants a smooth, quick and precise reel handling.

Technical features

Gross capacity	kg 50
E max vertical excursion	mm 3000 mm
Max lifting speed	0,6 mi/second
Control:	electronic 24 Volt D.C.
Electrical consumption	700 VA
Enclosure protection	IP 54
Work temperature:	de 0° a 40° C

Safety devices: a failsafe mechanic lock is triggered in the case of a power shortage and a brake limits the lowering speed of the motor.

ORBIT-ARM® Articulated arm

ORBITAL TOOL HEAD AND EXPANDING CHUCK: it features a reel barycentre adjusting device and a quick coupling device for handling reels with diameter ranging from 70 to 150 mm. It can be equipped with a vacuum grip system for handling cardboard cases.

CONTROL PANEL: it includes a direction indicator, a battery spy, a steering wheel with servo drive, a control handle for moving forward/backward with the truck, a stop button and a start key.

TRUCK TECHNICAL FEATURES: On customer request the INDEVA LIFTRONIC can be mounted on trucks chosen or supplied by the customer.